Engine Hose

Comflex Engine Hose

Series_SW569

Size Range – 5/8” – 2″ 15.9mm – 50.8mm Warranty – Limited Lifetime

Shields Comflex is a versatile wire reinforced hose specially designed for inspected vesssels.
Comflex is rated for fuel, vital water and non-vital water systems on boats requiring SAE J1942 hoses. Applications include bilge, coolant, oil and fuel systems using gasoline, gasohol, diesel, bio-diesel, wet exhaust systems, non-potable water systems, engine intake, toilet and holding tank connections. Get More Info…

…………………………………………………………………………………………………………………………………………..

Nautiflex Corrugated Silicone Exhaust Hose – Blue – Series No. 262

Size Range – 3/4″ – 16″ 19mm – 404mm Warranty – Limited Lifetime

Nautiflex Corrugated Silicone Exhaust Hose has a blue silicone tube and cover with a smooth finish for easy cleaning. The hose is wire reinforced and will not collapse under suction or in a bend. The corrugated cover allows the hose to bend for easy installation. The Nautiflex, two ply construction, has wire captured between fabric plies. This hose is primarily used for main engine exhaust, generator exhaust, engine coolant circulation, engine intake and generator intake. It is resistant to exhaust fumes, ozone, mild chemicals, antifreeze and saltwater. The hose remains stable at elevated temperatures. The temperatures ranges from -20°F – +350°F. This hose meets SAEJ2006 Type R2 and ISO 13362:2004 – Type 1 – Class B standards. Get More Info…

…………………………………………………………………………………………………………………………………………..

Nautiflex Silicone Exhaust Hose – Blue – Series No. 202

Size Range – 1″ – 14″ 25mm – 350mm  Warranty – Limited Lifetime

Nautiflex Silicone Exhaust Hose has a blue silicone cover with a smooth finish for easy clean up. This hose is flexible, easy to install and has four plies of synthetic fabric. It also remains stable at elevated temperatures. This hose is primarily used for straight connections in the wet exhaust system and engine water circulation lines. The temperature ranges from – 20°F – +350°F. The hose meets SAE J2006 Type R1 and ISO 13363:2004 – Type 2 – Class B standards. Get More Info…
…………………………………………………………………………………………………………………………………………..

Shieldsflex II Marine Water/Exhaust Hose (w/wire) – Series No. 250

Size Range – 1/2″ – 8″ 12.7mm – 203mm Warranty – Limited Lifetime

Shieldsflex II Marine Water/Exhaust Hose has a black synthetic rubber tube and cover. It is reinforced with wire helix imbedded between plies of HD synthetic cord. It is resistant to exhaust fumes, ozone, mild chemicals, anitfreeze and saltwater. This hose is abrasion and odor permeation resistant. It now has double the ozone resistance required by the SAEJ2006. Shieldsflex II is primarily used for engine intake, wet exhaust connections (use where bends or long lengths are required), bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holiding tank vent/pump out. The temperature ranges from -20° F – +200°F continuous, +250°F intermittent. The hose meets SAE J2006 Type R2 standards. Get More Info…
…………………………………………………………………………………………………………………………………………..

Marine Exhaust/Water Hose (No Wire) – Series No. 200

Size Range – 1/2″ – 14″ 12.7mm – 350mm  Warranty – Limited Lifetime

Marine Exhaust / Water Hose is reinforced with 2 or 4 plies of synthetic cord and is made of black, heavy-walled synthetic rubber. This hose is primarily used for straight connections in wet exhaust systems and engine water circulation lines. It is resistant to engine heat, exhaust fumes, ozone, mild chemicals, antifreeze and saltwater. This hose also has double the ozone resistance required by SAEJ2006. The temperature ranges from -20°F – + 200°F continuous, +250°F intermittent. The hose meets SAE J2006 Type R1 standards. Get More Info…
…………………………………………………………………………………………………………………………………………..

Water / Heater Hose – Series No. 130 – #1300

Size Range – 1/2″ – 3/4″ 12.7mm – 19.05mm  Warranty – Limited Lifetime

#1300 Water / Heater Hose is fabric reinforced and has an EPDM tube and cover. This hose is primarily used for engine heater hose, heat exchanger, A/C circulation, and drain lines (sink, icebox, shower and livewell). It is resistant to mild chemicals, heat, cold, ozone and saltwater. The temperature ranges from -40°F – +190°F. Get More Info…
…………………………………………………………………………………………………………………………………………..

Heavy Duty Water Hose – Series No. 135 – #1350

Size Range – 1/2″ – 1″ 12.7 – 25.4mm  Warranty – Limited Lifetime

#1350 Water / Heater Hose is fabric reinforced and has an EPDM tube and cover. This hose is primarily used for engine heater hose, heat exchanger, A/C circulation, and drain lines ( sink, icebox, shower and livewell ). It is resistant to mild chemicals, heat, cold, ozone and saltwater. The temperature ranges from -40ºF – +190ºF. Get More Info…
…………………………………………………………………………………………………………………………………………..

Water/Heater Hose – Series No. 160 – #1600

Size Range – 1/4″ – 1 1/4″ 6.4mm – 38mm Warranty – Limited Lifetime

#1600 Water/Heater Hose has a good bend radius, is fabric reinforced, and has an EPDM tube and cover. This hose is primarily used for critical water connections, heat exchanger, toilet intake, small engine intake, bilge pump intake/discharge, and below water line drains and scuppers. It is resistant to mild chemicals, heat, cold, ozone and saltwater. The temperature ranges from -40°F – +190°F. Get More Info…