Size Range – 1/2″ – 3/4″ 12.7mm – 19.05mm Warranty – Limited Lifetime
#1300 Water / Heater Hose is fabric reinforced and has an EPDM tube and cover. This hose is primarily used for engine heater hose, heat exchanger, A/C circulation, and drain lines (sink, icebox, shower and livewell). It is resistant to mild chemicals, heat, cold, ozone and saltwater. The temperature ranges from -40°F – +190°F.
Applications
May Kink in Applications: – (Flexibility – 3)
Designed to give Good Service in normal Applications:
• Engine Coolant Hose Straight or Limited Bend
Not Recommended:
• Engine Intake
• Engine Coolant Hose Severe Bend
• Exhaust Water Injection
• Generator Intake
Ordering Information
I.D. | mm | O.D. | mm | Working Pressure | Wt “C” | 500′ (152.4M) Reel Code # |
Bulk Pack 50′ (15.2m) R/O Ctn. Code # |
Bulk Pack 25 (7.6m) R/O Ctn. Code # |
||||||||
1/2″ | 12.7 | .736 | 18.9 | 62 psi | 17 | 16-130-0120 | 16-130-0126 | – | ||||||||
5/8″ | 15.9 | .878 | 22.3 | 62 psi | 21 | 16-130-0580 | 16-130-0586 | 16-130-0585 | ||||||||
3/4″ | 19.1 | 1.003 | 25.48 | 50 psi | 26 | 16-130-0340 | 16-130-0346 | 16-130-0345 |