Water / Heater Hose – Series No. 160 – #1600

Size Range – 1/4″ – 1 1/4″ 6.4mm – 38mm Warranty – Limited Lifetime

#1600 Water/Heater Hose has a good bend radius, is fabric reinforced, and has an EPDM tube and cover. This hose is primarily used for critical water connections, heat exchanger, toilet intake, small engine intake, bilge pump intake/discharge, and below water line drains and scuppers. It is resistant to mild chemicals, heat, cold, ozone and saltwater. The temperature ranges from -40°F – +190°F.

Applications

Can be bent into Gradual Radius: – (Flexibility – 2)
Designed to give Excellent Service for:
• Engine Coolant Hose Straight or Limited Bend
Designed to give Good Service in normal Applications:
• Generator Intake
• Exhaust Water Injection
Not Recommended:
• Engine Intake
• Engine Coolant Hose Severe Bend

Ordering Information

I.D. mm O.D. mm Working Pressure Wt “C” Bulk Pack Code # m Dist.Pkg. 50′ (15.2)
R/O Ctn. Code #
1/4″ 6.4 .527 13.4 250 psi 10 16-160-0140 (500′ reel) 152.4 16-160-0146
3/8″ 9.5 .7 17.8 250 psi 17 16-160-0380 (500′ reel) 152.4 16-160-0386
1/2″ 12.7 .838 21.3 250 psi 22 16-160-0120 (450 ‘reel) 137.2 16-160-0126
5/8″ 15.9 1 25.4 250 psi 28 16-160-0580 (400′ reel) 121.9 16-160-0586
3/4″ 19.1 1.133 28.8 250 psi 34 16-160-0340 (300′ reel) 91.4 16-160-0346
1″ 25.4 1.448 36.8 200 psi 52 16-160-1000 (250′ reel) 76.2 16-160-1006
1 1/4″ 31.8 1.75 44.5 200 psi 62 16-160-1140 (200′ reel) 61.0 16-160-1146