Select your Engine Configuration

Single Engine

ORDER THE FOLLOWING:

HC6845S x 1 Cylinder

GENERAL INSTALLATION NOTES:
1) Installation may vary according to the following factors: engine mounting height, transom thickness,
use of transom savers, tiller bolt hole location, engine tilt range, and engine size.

……………………………………………………………………………………………………………………………………………..

OPTIONAL FITTING KIT:

Allows you to clean up the plumbing
HF6005 x 1

……………………………………………………………………………………………………………………………………………..

OPTIONAL EQUIPMENT

SeaStar Power Assist
PA1200-2 x 1
Standard 15′ Harness

The Marine Industry is continually introducing heavier outboard engines, higher horse power engines, more aggressive
propellers, bigger/faster boats.  Boat operators are asking for increased comfort and lighter steering loads.
These were the driving forces behind the design of SeaStar and SeaStar PRO Power Assist.

This new and innovative product is highly recommended on any 200HP and above outboard application to give your
boat the same, easy steering you are accustomed to in your car. Power Assist is also recommended for the following:
• Twin and Triple engine applications
• Bass Boats
• Power Catamarans
• Inboard powered cruisers without engine driven power assist.

Tilt Helm

1 Per Station

COVER TYPE DISPLACEMENT (CU”-IN) PRO* WHEEL SHAFT PART NUMBER
Sport 1.4 No Taper HH4315
Sport 1.7 Yes Taper HH6189
Sport 1.7 No Taper HH6191
Sport 2.0 No Taper HH6145
Sport 2.0 Yes Taper HH6190
Sport 2.4 Yes Taper HH6188
Sport 2.4 No Taper HH6192
Sport Plus 1.7 Yes Taper HH6489
Sport Plus 1.7 No Taper HH6491
Sport Plus 2.0 Yes Taper HH6490
Sport Plus 2.4 No Taper HH6492
Classic 1.7 No Taper HH6541
Classic 2.4 No Taper HH6542
*Pro Helms have a patented lock valve system designed for high torque single outboard applications.
All Tilt Helms listed include the hydraulic helm and tilt mechanism with cover.
Pro helms cannot be used with an un-balanced cylinder.

 

Stainless Steel Bulkhead Hose Kits
SeaStar Single Stainless Steel Bulkhead Hose Kit (2 hoses): HO86XX

SeaStar Double Stainless Steel Bulkhead Hose Kit (2 hoses): HO88XX

XX=length of hose in feet
* SeaStar and SeaStar Pro Hose Kits are available in lengths from 2 foot to 30 foot. 40 foot hose kits are special order only.

……………………………………………………………………………………………………………………………………………..

REASONS TO UPGRADE

• Robust appearance
• Universal cylinder (i.e. no individual port/starboard/center configurations)
• Bolt-on stainless steel tie bar plates
– Reversible from left to right , providing high or low tie bar connections
– Easily adaptable to future engine offerings
• Robust design
– Heavy duty support brackets, barrel, shaft ,pivot plate and seals
• Adjustable O-ring fittings (no need to remove for adjustment)
• Improved accessibility to bleeders
• Improved corrosion resistance
• Incorporates proven design features from Pro cylinders (keyed support bracket, stainless steel wear washer)

……………………………………………………………………………………………………………………………………………..

Contact us
SeaStar Tournament installation manual
SeaStar Tournament product page
Print final summary

Twin Engine - Single Cylinder (Starboard Only)

ORDER THE FOLLOWING:

HC6845 x 1 Cylinder
HA6802 x 1 Hardware Kit

GENERAL INSTALLATION NOTES:
1) Installation may vary according to the following factors: engine mounting height, transom thickness, use of
transom savers, tiller bolt hole location, engine tilt range, and engine size
3) Tie bar length may vary depending on toe in/toe out setup. To allow for toe, add or subtract from your
nominal engine center to center distance.
4) Based on recommended engine manufacturer minimum center to center distances. Deviating from these
recommendations may require stroke limiting cylinders and/or engine tilt limiting, please consult
Teleflex Technical Service.
5) Cylinder’s must be plumbed in parallel only, no series connections. Only exception is if cylinders are
utilizing a liquid tie bar.

……………………………………………………………………………………………………………………………………………..

OPTIONAL FITTING KIT:

Allows you to clean up the plumbing
HF6005 x 1

……………………………………………………………………………………………………………………………………………..

OPTIONAL EQUIPMENT

SeaStar Power Assist
PA1200-2 x 1
Standard 15′ Harness

The Marine Industry is continually introducing heavier outboard engines, higher horse power engines, more aggressive
propellers, bigger/faster boats.  Boat operators are asking for increased comfort and lighter steering loads.
These were the driving forces behind the design of SeaStar and SeaStar PRO Power Assist.

This new and innovative product is highly recommended on any 200HP and above outboard application to give your
boat the same, easy steering you are accustomed to in your car. Power Assist is also recommended for the following:
• Twin and Triple engine applications
• Bass Boats
• Power Catamarans
• Inboard powered cruisers without engine driven power assist.

Tilt Helm

1 Per Station

COVER TYPE DISPLACEMENT (CU”-IN) PRO* WHEEL SHAFT PART NUMBER
Sport 1.4 No Taper HH4315
Sport 1.7 Yes Taper HH6189
Sport 1.7 No Taper HH6191
Sport 2.0 No Taper HH6145
Sport 2.0 Yes Taper HH6190
Sport 2.4 Yes Taper HH6188
Sport 2.4 No Taper HH6192
Sport Plus 1.7 Yes Taper HH6489
Sport Plus 1.7 No Taper HH6491
Sport Plus 2.0 Yes Taper HH6490
Sport Plus 2.4 No Taper HH6492
Classic 1.7 No Taper HH6541
Classic 2.4 No Taper HH6542
*Pro Helms have a patented lock valve system designed for high torque single outboard applications.
All Tilt Helms listed include the hydraulic helm and tilt mechanism with cover.
Pro helms cannot be used with an un-balanced cylinder.

 

Stainless Steel Bulkhead Hose Kits
SeaStar Single Stainless Steel Bulkhead Hose Kit (2 hoses): HO86XX

SeaStar Double Stainless Steel Bulkhead Hose Kit (2 hoses): HO88XX

XX=length of hose in feet
* SeaStar and SeaStar Pro Hose Kits are available in lengths from 2 foot to 30 foot. 40 foot hose kits are special order only.

……………………………………………………………………………………………………………………………………………..

REASONS TO UPGRADE

• Robust appearance
• Universal cylinder (i.e. no individual port/starboard/center configurations)
• Bolt-on stainless steel tie bar plates
– Reversible from left to right , providing high or low tie bar connections
– Easily adaptable to future engine offerings
• Robust design
– Heavy duty support brackets, barrel, shaft ,pivot plate and seals
• Adjustable O-ring fittings (no need to remove for adjustment)
• Improved accessibility to bleeders
• Improved corrosion resistance
• Incorporates proven design features from Pro cylinders (keyed support bracket, stainless steel wear washer)

……………………………………………………………………………………………………………………………………………..

Contact us
SeaStar Tournament installation manual
SeaStar Tournament product page
Print final summary

Twin Engine - Dual Cylinder

ORDER THE FOLLOWING:

HC6845 x 2 Cylinders
HA6804 x 1 Hardware Kit

GENERAL INSTALLATION NOTES:
1) Installation may vary according to the following factors: engine mounting height, transom thickness, use of
transom savers, tiller bolt hole location, engine tilt range, and engine size.
3) Tie bar length may vary depending on toe in/toe out setup. To allow for toe, add or subtract from your
nominal engine center to center distance.
4) Based on recommended engine manufacturer minimum center to center distances. Deviating from these
recommendations may require stroke limiting cylinders and/or engine tilt limiting, please consult Teleflex Technical Service.
5) Cylinder’s must be plumbed in parallel only, no series connections. Only exception is if cylinders are utilizing a liquid tie bar.

……………………………………………………………………………………………………………………………………………..

OPTIONAL FITTING KIT:

Allows you to clean up the plumbing
HF6005 x 1

……………………………………………………………………………………………………………………………………………..

OPTIONAL EQUIPMENT

SeaStar Power Assist
PA1200-2 x 1
Standard 15′ Harness

The Marine Industry is continually introducing heavier outboard engines, higher horse power engines, more aggressive
propellers, bigger/faster boats.  Boat operators are asking for increased comfort and lighter steering loads.
These were the driving forces behind the design of SeaStar and SeaStar PRO Power Assist.

This new and innovative product is highly recommended on any 200HP and above outboard application to give your
boat the same, easy steering you are accustomed to in your car. Power Assist is also recommended for the following:
• Twin and Triple engine applications
• Bass Boats
• Power Catamarans
• Inboard powered cruisers without engine driven power assist.

Tilt Helm

1 Per Station

COVER TYPE DISPLACEMENT (CU”-IN) PRO* WHEEL SHAFT PART NUMBER
Sport 1.4 No Taper HH4315
Sport 1.7 Yes Taper HH6189
Sport 1.7 No Taper HH6191
Sport 2.0 No Taper HH6145
Sport 2.0 Yes Taper HH6190
Sport 2.4 Yes Taper HH6188
Sport 2.4 No Taper HH6192
Sport Plus 1.7 Yes Taper HH6489
Sport Plus 1.7 No Taper HH6491
Sport Plus 2.0 Yes Taper HH6490
Sport Plus 2.4 No Taper HH6492
Classic 1.7 No Taper HH6541
Classic 2.4 No Taper HH6542
*Pro Helms have a patented lock valve system designed for high torque single outboard applications.
All Tilt Helms listed include the hydraulic helm and tilt mechanism with cover.
Pro helms cannot be used with an un-balanced cylinder.

 

Stainless Steel Bulkhead Hose Kits
SeaStar Single Stainless Steel Bulkhead Hose Kit (2 hoses): HO86XX

SeaStar Double Stainless Steel Bulkhead Hose Kit (2 hoses): HO88XX

XX=length of hose in feet
* SeaStar and SeaStar Pro Hose Kits are available in lengths from 2 foot to 30 foot. 40 foot hose kits are special order only.

……………………………………………………………………………………………………………………………………………..

REASONS TO UPGRADE

• Robust appearance
• Universal cylinder (i.e. no individual port/starboard/center configurations)
• Bolt-on stainless steel tie bar plates
– Reversible from left to right , providing high or low tie bar connections
– Easily adaptable to future engine offerings
• Robust design
– Heavy duty support brackets, barrel, shaft ,pivot plate and seals
• Adjustable O-ring fittings (no need to remove for adjustment)
• Improved accessibility to bleeders
• Improved corrosion resistance
• Incorporates proven design features from Pro cylinders (keyed support bracket, stainless steel wear washer)

……………………………………………………………………………………………………………………………………………..

Contact us
SeaStar Tournament installation manual
SeaStar Tournament product page
Print final summary

Triple Engine - Dual Cylinder

ORDER THE FOLLOWING:

HC6845 x 2 Cylinders
HA6806 x 1 Hardware Kit

GENERAL INSTALLATION NOTES:
1) Installation may vary according to the following factors:  engine mounting height, transom thickness, use of
transom savers, tiller bolt hole location, engine tilt range, and engine size.
2) For center engine drops greater than 3 inches (76mm), please consult Teleflex Technical Service.
3) Tie bar length may vary depending on toe in/toe out setup. To allow for toe, add or subtract from your
nominal engine center to center distance.
4) Based on recommended engine manufacturer minimum center to center distances. Deviating from these
recommendations may require stroke limiting cylinders and/or engine tilt limiting, please consult Teleflex Technical Service.
5) Cylinder’s must be plumbed in parallel only, no series connections. Only exception is if cylinders are utilizing a liquid tie bar.

Maximum drop:  ≤ 3 inches (76mm)

……………………………………………………………………………………………………………………………………………..

OPTIONAL FITTING KIT:

Allows you to clean up the plumbing
HF6005 x 1

……………………………………………………………………………………………………………………………………………..

OPTIONAL EQUIPMENT

SeaStar Power Assist
PA1200-2 x 1
Standard 15′ Harness

The Marine Industry is continually introducing heavier outboard engines, higher horse power engines, more aggressive
propellers, bigger/faster boats.  Boat operators are asking for increased comfort and lighter steering loads.
These were the driving forces behind the design of SeaStar and SeaStar PRO Power Assist.

This new and innovative product is highly recommended on any 200HP and above outboard application to give your
boat the same, easy steering you are accustomed to in your car. Power Assist is also recommended for the following:
• Twin and Triple engine applications
• Bass Boats
• Power Catamarans
• Inboard powered cruisers without engine driven power assist.

Tilt Helm

1 Per Station

COVER TYPE DISPLACEMENT (CU”-IN) PRO* WHEEL SHAFT PART NUMBER
Sport 1.4 No Taper HH4315
Sport 1.7 Yes Taper HH6189
Sport 1.7 No Taper HH6191
Sport 2.0 No Taper HH6145
Sport 2.0 Yes Taper HH6190
Sport 2.4 Yes Taper HH6188
Sport 2.4 No Taper HH6192
Sport Plus 1.7 Yes Taper HH6489
Sport Plus 1.7 No Taper HH6491
Sport Plus 2.0 Yes Taper HH6490
Sport Plus 2.4 No Taper HH6492
Classic 1.7 No Taper HH6541
Classic 2.4 No Taper HH6542
*Pro Helms have a patented lock valve system designed for high torque single outboard applications.
All Tilt Helms listed include the hydraulic helm and tilt mechanism with cover.
Pro helms cannot be used with an un-balanced cylinder.

 

Stainless Steel Bulkhead Hose Kits
SeaStar Single Stainless Steel Bulkhead Hose Kit (2 hoses): HO86XX

SeaStar Double Stainless Steel Bulkhead Hose Kit (2 hoses): HO88XX

XX=length of hose in feet
* SeaStar and SeaStar Pro Hose Kits are available in lengths from 2 foot to 30 foot. 40 foot hose kits are special order only.

……………………………………………………………………………………………………………………………………………..

REASONS TO UPGRADE

• Robust appearance
• Universal cylinder (i.e. no individual port/starboard/center configurations)
• Bolt-on stainless steel tie bar plates
– Reversible from left to right , providing high or low tie bar connections
– Easily adaptable to future engine offerings
• Robust design
– Heavy duty support brackets, barrel, shaft ,pivot plate and seals
• Adjustable O-ring fittings (no need to remove for adjustment)
• Improved accessibility to bleeders
• Improved corrosion resistance
• Incorporates proven design features from Pro cylinders (keyed support bracket, stainless steel wear washer)

……………………………………………………………………………………………………………………………………………..

Contact us
SeaStar Tournament installation manual
SeaStar Tournament product page
Print final summary

Quad Engine - Dual Cylinder

ORDER THE FOLLOWING:

HC6845 x 2 Cylinders
HA6811 x 1 Hardware Kit

CONSULT TELEFLEX TECHNICAL SUPPORT FOR THE TIE BAR INFORMATION
Contact Number: 604-248-3858

GENERAL INSTALLATION NOTES:
1) Installation may vary according to the following factors:  engine mounting height, transom thickness, use of
transom savers, tiller bolt hole location, engine tilt range, and engine size.
3) Tie bar length may vary depending on toe in/toe out setup. To allow for toe, add or subtract from your
nominal engine center to center distance.
4) Based on recommended engine manufacturer minimum center to center distances. Deviating from these
recommendations may require stroke limiting cylinders and/or engine tilt limiting, please consult Teleflex Technical Service.
5) Cylinder’s must be plumbed in parallel only, no series connections. Only exception is if cylinders are utilizing a liquid tie bar.

Quintuplit Engine (Greater than 5)

CONSULT TELEFLEX TECHNICAL SUPPORT FOR INFORMATION
Contact Number: 604-248-3858

GENERAL INSTALLATION NOTES:
1) Installation may vary according to the following factors:  engine mounting height, transom thickness, use of
transom savers, tiller bolt hole location, engine tilt range, and engine size.
3) Tie bar length may vary depending on toe in/toe out setup. To allow for toe, add or subtract from your
nominal engine center to center distance.
4) Based on recommended engine manufacturer minimum center to center distances. Deviating from these
recommendations may require stroke limiting cylinders and/or engine tilt limiting, please consult Teleflex Technical Service.
5) Cylinder’s must be plumbed in parallel only, no series connections. Only exception is if cylinders are utilizing a liquid tie bar.